RBEF-P Type Partially filled(Open Channel) electromagnetic flow meter new release

 RBEF-P Type Partially filled(Open Channel) electromagnetic flow meter is a flow automatic measuring instrument use for continuous measurement in open pipeline(such as semi-flow sewer pipes and large-flow pipes without overflow weirs  or mass flow pipe with none down flow weir) by velocity-area method. 

RBEF-P Type Electromagnetic Partially Filled Pipe Flow Meter is composed of an electromagnetic flow rate sensor, a liquid level sensor and a flow indicator.

Highlights 

• For partially filled pipes in the water and wastewater industry 

• Broad diameter range up 4"to  56" (DN100 to DN1400)

• High abrasion- and chemical resistance 

• Measurement possible between 10% and 100% filling 

• Electrodes for flow measurement are below 10% filling level, therefore no blind folding by fat and oil floating on the water surface 

• Complete factory calibration, no on-site calibration required 


Industries 

• Water 

• Wastewater 

Applications 

• For partially filled pipes instead of expensive siphon tube constructions 

• Water and wastewater 

• Surface water 

• Biological and chemical wastewater

评论

发表评论

此博客中的热门博文

Understanding the Micro Magnetic Inductive Flow Meter for Ultra Low flow

图片
Introduction A magnetic flow meter, also referred to as a mag meter or an electromagnetic flow meter, is a device that measures the flow rate of conductive fluids using Faraday's Law of electromagnetic induction. This type of flow meter is widely used in various industries including water treatment, chemical, pharmaceutical, and food & beverage. How does a Magnetic Flow Meter Work? The working principle of a magnetic flow meter is based on Faraday's law of electromagnetic induction. According to this principle, when a conductive fluid flows through a magnetic field, it generates a voltage which is directly proportional to the flow velocity. The generated voltage is then measured by electrodes attached to the flow tube. As the fluid's velocity changes, so does the voltage. By measuring this voltage, the flow meter can accurately calculate the flow rate. Key Features of the Unique Magnetic Flow Meter To cater to the different needs of industries, magnetic flow meters come
阅读全文

Choosing the Right Liquid Low Flowmeter -Ultrasonic, Electromagnetic and Coriolis mass flow meters

图片
 Choosing the Right Liquid Low Flowmeter: A Comprehensive Guide Introduction: In industrial processes, the precision of liquid low flow measurement can hinge on the selection of the appropriate flowmeter. Whether ensuring accurate dosing in pharmaceuticals or monitoring fuel consumption in aerospace, the stakes are high. With the advancement in technology, several flowmeters have emerged to cater to these specific needs, among which Ultrasonic, magnetic, and Coriolis mass flowmeters are primarily used for liquid low flow rate applications. This article endeavors to parse the complexities of these instruments and guide you in choosing the correct low flowmeter for your specific liquid measurement needs. Understanding Low Flow Measurement: Low flow measurement refers to the quantification of liquid movement at rates typically considered lower than the usual scope of industrial processes. It is critical in applications where precision is not just required but is critical for success—rangi
阅读全文