RBEF-E mini flow Magnetic Inductive Flow Sensor(DN3 - DN20)

Magnetic Inductive Flow Sensor(DN3 - DN20), flow rate more than 0.3m/s) used for measuring and monitoring smaller and medium-sized flow of conductivity liquids in pipes. The device operates according to the electromagnetic measurement principle. According to Faraday’s Law of magnetic induction a voltage is induced in a conductor moving through a magnetic field. The electrically conductive measuring agent acts as the moved conductor.
Magnetic Inductive Flow Sensor

评论

发表评论

此博客中的热门博文

Choosing the Right Liquid Low Flowmeter -Ultrasonic, Electromagnetic and Coriolis mass flow meters

图片
 Choosing the Right Liquid Low Flowmeter: A Comprehensive Guide Introduction: In industrial processes, the precision of liquid low flow measurement can hinge on the selection of the appropriate flowmeter. Whether ensuring accurate dosing in pharmaceuticals or monitoring fuel consumption in aerospace, the stakes are high. With the advancement in technology, several flowmeters have emerged to cater to these specific needs, among which Ultrasonic, magnetic, and Coriolis mass flowmeters are primarily used for liquid low flow rate applications. This article endeavors to parse the complexities of these instruments and guide you in choosing the correct low flowmeter for your specific liquid measurement needs. Understanding Low Flow Measurement: Low flow measurement refers to the quantification of liquid movement at rates typically considered lower than the usual scope of industrial processes. It is critical in applications where precision is not just required but is critical for success—r...
阅读全文

Advantages and Disadvantages of Electromagnetic Flowmeter and Ultrasonic Flow meter

图片
 Electromagnetic flowmeters and ultrasonic flowmeters are two commonly used types of flowmeters, each with its own set of characteristics.  Electromagnetic Flowmeter Advantages Keywords: high-precision measurement, suitable for conductive liquids, no pressure loss and energy-saving, good linearity, corrosion resistance, bidirectional measurement, simple structure. High-precision measurement: Minimal influence from factors like fluid temperature, viscosity, density, and pressure results in high accuracy for measuring conductive liquids, with an error usually within ±0.5%. Widely used in industries such as chemical and pharmaceutical where precision is crucial. Suitable for conductive liquids: Can measure various conductive solutions like acids, alkalis, salt solutions, as well as liquid-solid two-phase fluids like sewage, slurry, and pulp. Plays an important role in fields like sewage treatment, metallurgy, and mining. No pressure loss and energy-saving: The simple sensor struc...
阅读全文