How to select Magmeters Liner?

When the applications need some flow meters, it's very important to provide necessary technical information to correctly select the models.
For Electromagnetic sensor, there are such as  hard rubber (Ebonite, NBR), soft rubber (EPDM, Neoprene, Linatex), Teflon (PTFE, PFA), ceramic, and HDPE, etc.

All of them have strengths and weaknesses, and it is important to select the right material for the process fluid.

Magflow sensor

Many different options are available for liner material used in a magnetic flow meter. This can cause confusion as to what to choose.

There are several factors you must consider when selecting a lining material. All of the following must be taken into account before a selection is made.

  • Chemical resistivity;
  • Temperature range
  • Mechanical stability
  • Abrasion resistance


How magmeter durability depends on selection of proper materials for a given application. Factors governing selection are the chemicals being measured, as well as their temperature, abrasive characteristics, and sanitary requirements.

评论

发表评论

此博客中的热门博文

Choosing the Right Liquid Low Flowmeter -Ultrasonic, Electromagnetic and Coriolis mass flow meters

图片
 Choosing the Right Liquid Low Flowmeter: A Comprehensive Guide Introduction: In industrial processes, the precision of liquid low flow measurement can hinge on the selection of the appropriate flowmeter. Whether ensuring accurate dosing in pharmaceuticals or monitoring fuel consumption in aerospace, the stakes are high. With the advancement in technology, several flowmeters have emerged to cater to these specific needs, among which Ultrasonic, magnetic, and Coriolis mass flowmeters are primarily used for liquid low flow rate applications. This article endeavors to parse the complexities of these instruments and guide you in choosing the correct low flowmeter for your specific liquid measurement needs. Understanding Low Flow Measurement: Low flow measurement refers to the quantification of liquid movement at rates typically considered lower than the usual scope of industrial processes. It is critical in applications where precision is not just required but is critical for success—r...
阅读全文

Advantages and Disadvantages of Electromagnetic Flowmeter and Ultrasonic Flow meter

图片
 Electromagnetic flowmeters and ultrasonic flowmeters are two commonly used types of flowmeters, each with its own set of characteristics.  Electromagnetic Flowmeter Advantages Keywords: high-precision measurement, suitable for conductive liquids, no pressure loss and energy-saving, good linearity, corrosion resistance, bidirectional measurement, simple structure. High-precision measurement: Minimal influence from factors like fluid temperature, viscosity, density, and pressure results in high accuracy for measuring conductive liquids, with an error usually within ±0.5%. Widely used in industries such as chemical and pharmaceutical where precision is crucial. Suitable for conductive liquids: Can measure various conductive solutions like acids, alkalis, salt solutions, as well as liquid-solid two-phase fluids like sewage, slurry, and pulp. Plays an important role in fields like sewage treatment, metallurgy, and mining. No pressure loss and energy-saving: The simple sensor struc...
阅读全文