Low flow Magnetic meter for low flow metering, Chemical injection and Fertigation

The RBEF-E is small Electromagnetic low flow flowmeters with chemically resistant parts suitable for using with a variety of chemicals, the pipe size is from DN1.5mm to DN20mm, with or without display. More information visit :
http://www.rbflowmeters.com/Flow_meter-Magmeter-Mini_Inductive_Magflow/

Magnetic Inductive flow meter
Blind low flow meter

评论

发表评论

此博客中的热门博文

What Are the Requirements for a Magnetic Flow Meter? Key Installation Considerations Key points

图片
Magnetic flow meters (magmeters) are widely used for measuring conductive liquids in industries like water treatment, chemical processing, and food production. However, their accuracy and longevity depend heavily on meeting specific requirements and proper installation. Here ’ s what you need to know:    Key Requirements for Magnetic Flow Meters  1. Fluid Conductivity      - Minimum Conductivity: The liquid must have a conductivity of ≥ 1 µS/cm (varies by model). Pure water or non-conductive fluids (e.g., oils) are unsuitable.     2. Full Pipe Flow      - Ensure the pipe is 100% full during operation. Air bubbles or partially filled pipes cause measurement errors.     3. Pipe Material      - Use non-magnetic pipes (e.g., PVC, stainless steel, or lined pipes). Magnetic materials (e.g., carbon steel) disrupt the meter ’ s magnetic field.     4. Grounding      - ...
阅读全文

What Is the Minimum Conductivity Required for a Magnetic Flow Meter? 1 µS/cm

图片
Magnetic flow meters (magmeters) are indispensable tools for measuring the flow of conductive liquids in industries ranging from water treatment to pharmaceutical production. But one critical question often arises: What is the minimum conductivity required for these devices to work accurately? In this article, we’ll dive into the science behind magmeters, explain why conductivity matters, and explore advanced solutions like the RBEF8C Low Conductivity Electromagnetic Flow Meter that push the boundaries of traditional limits.   How Magnetic Flow Meters Work: The Role of Conductivity   Magnetic flow meters operate on Faraday’s Law of Electromagnetic Induction. Here’s the basic principle:   1. When a conductive fluid flows through a magnetic field generated by the meter’s coils, it induces a voltage proportional to the flow velocity.   2. Electrodes mounted on the pipe wall detect this voltage, which is then converted into a flow rate.   K...
阅读全文

How to Install a Magnetic Flow Meter（EMF）？

图片
 A Step-by-Step Guide for Optimal Performance   Magnetic flow meters (magmeters) are widely used in industries like water treatment, chemical processing, and food production due to their accuracy and ability to handle conductive fluids. However, improper installation can lead to measurement errors or even device failure. In this guide, we ’ ll break down the critical steps for installing a magnetic flow meter correctly, highlight common pitfalls, and share real-world project examples to ensure your system operates flawlessly.   Step 1: Positioning the Flowmeter   Key Rule: Install on the Pump ’ s Thrust Side, NOT the Suction Side   The location of your magmeter is critical. Always place it downstream of the pump ’ s discharge (thrust side). Installing it on the suction side can cause air bubbles or uneven flow profiles due to turbulence, leading to inaccurate readings.   Why It Matters:  - The thrust side ensures stable, fully developed f...
阅读全文